Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-27





• Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode.



Field Action Default value

Select DNS Server
Interface from available
WAN interfaces
For more details, a summary table is presented below
for each column. ppp1
pppoa2
Use the following Static
DNS IP address
If you check this box, you must enter DNS server
addresses.
Not checked
Primary DNS server Enter a primary DNS server address. -
Secondary DNS server Enter a secondary DNS server address. -

Select DNS Server Interface from available WAN interfaces

Button Action


Transfer the interfaces selected in the Available WAN
Interfaces area to the Selected DNS Server Interfaces area.


Transfer the interfaces selected in the Selected DNS Server
Interfaces area to the Available WAN Interfaces area.