Installation guide

9- Updating the firmware
Page 9-2 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited





You can update the firmware using one of the following methods:

• via HTTP
• via TR69 protocol
• automatically: the new firmware version download is performed automatically on starting up the router.

Important

Throughout the download procedure (up to five minutes), you must:
• not power down the router,
• not disconnect from the ADSL line.


The download process is transparent on the router side: there is no LED blinking informing you of the
download process. So please make sure to wait for the router to reboot completly. The HTTP tool
configuration however shows the download status in the Supervision box.

Note


To check that the new version has been correctly downloaded, select in the HTTP
configuration tool the Device info menu; the Software version field displays the
last software version installed.


HTTP update

You can download the new firmware to update your router using the Management menu in the HTTP
configuration tool (see section 6).

TR69 protocol

Operators can use "TR69" protocol to upgrade the router's firmware from their ACS server.