Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-131





6.8.4 TR-069 Client

Object: The TR-069 protocol (WAN Management Protocol) is used, via a remote server
(Auto-Configuration Server (ACS)) to auto configure your router, provide it with certain services
and manage it by establishing "diagnostics".

• In the Management menu, select TR-069 Client.
The following screen opens:



Field

Action
Default
value

Inform
Check the Enable box to activate the "TR-069" or Disable to
deactivate it.
Disable

Inform Interval
Enter a time interval between two pieces of information sent
from the router to the ACS server.
This interval is a value (in seconds).
300
ACS URL Enter the URL or the IP address of the ACS server. -
ACS User Name Enter the name of the user of the ACS server. admin
ACS Password Enter the ACS server password. admin
WAN Interface used
by TR-069 client
Select in the scroll down list the desired WAN interface. Any_WAN
Display SOAP
Messages on serial
console
Check the Enable box to activate it or Disable to deactivate it. Disable
Connection Request
Authentication
Check the box to activate authentication or uncheck it to
deactivate it.
Checked
Connection Request
User Name
Enter the name of the user of your router. admin
Connection Request
Password
Enter your password for your router. admin
Customize
Connection Request
URL Port
Enter the port to use for Connection request from the ACS. 7547
• Click on the Get RPCMethods button to launch the auto-configuration procedure of your router.