Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-117






Field

Action/Meaning
Default
value



Beacon Interval
A beacon is basically a heartbeat for a wireless client or
gateway, sending out a signal informing wireless clients that
the wireless network is still active.
Enter a time in milliseconds between beacon transmissions
between 1 and 1000 milliseconds.
The default beacon interval is 100 ms.
100
Global Max
Clients
Enter the maximum number wireless customers for your
router.
16
XPress
TM
Technology
From the scroll down list, select Enabled to apply the
"XPressTM" technology or Disabled to not apply it.
Disabled



Transmit Power
If 802.11 h is selected, in the scroll down list select the
cyclical emission ratio (20%, 40 %, 60 %, 80 % or 100 %) at
which you want to transmit.
Note: The power rate will be selected according to your
environment.
100%
WMM(Wi-Fi
Multimedia)
Select Enabled to apply the WMM support, or Disabled not
to apply it in the scroll down list.
Enabled

WMM No
Acknowledgem
ent
Select Enabled or Disabled in the scroll down list to permit
or prohibit a more effective bit rate of the data flow with, on
the other hand, a higher error rate.
Note: The scroll down list may only be operational if the
"WMM (Wi-Fi Multimedia)" field is activated.
Disabled



WMM APSD
WMM (Wi-Fi MultiMedia) with APSD (Automatic Power Save
Delivery) option manages battery-powered radio devices to
extend their autonomy in some cases. This option provides a
longer range tag to launch an application that requires a
short interval of packet exchange.
Select Enabled to activate this option.
Enabled