Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-101





6.5.2.1 WPS Setup



Field Action/Meaning Default value
Enable WPS Check the box to activate WPS. Enabled





Add Client
a
Define a scenario for WPS protocol:
• Push-Button
• Enter STA PIN: first check the box and enter the PIN
(Personal Identification Number) of the STA (Enrollee
Station).If necessary, click on [Add Enrollee] add an
Enrollee Station.
• Use AP PIN: check this box to enable this scenario.
Push-Button
Set WPS AP
Mode
Choose whether you router is already configured or not. Configured
Device PIN CPE PIN number 12279180
a. This feature is available only when WPA-PSK, WPA2 PSK or OPEN mode is configured.



6.5.2.2 Manual Setup AP



Field Action/Meaning Default value

Select SSID
Select the "SSID" of your choice from the scroll down list
(sagem or Guest).
SAGEM_3325


Network
Authentication
From the scroll down list, select the security adapted to your
router's wireless network.
This choice will modify the Wireless configuration screen.
For more details, a summary table is presented below in
section Network Authentication (see subsection 6.5.2.3).
WPA2 - PSK


WEP Encryption
Select from the scroll down list:
• Disabled to not use WEP encryption.
• Enabled to use WE encryption (see subsection WEP).
Disabled