Installation guide

6-
A
dvanced parameters
Page 6-34 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited





6.4.2.4 Ethernet over ATM - Bridging



• Select the WAN service type Bridging.




Field

Action
Default
value


Enter Service
description
Displays the name of the service being configured. This name,
which is allocated automatically, is made up as follows:
Protocol_VPI_ Index _ VCI
For example: br_0_8_32.
Note: You may enter another service name.
br_0_8_32

Enter 802.1P Priority
a
Enter a value for the 802.1P Priority. This value is between 0
and 7.
-1

Enter 802.1Q VLAN ID
a.
Enter a value for the 802.1QVLAN ID. This value is between 0
and 4094.
-1
a. These values only appear if the WAN service is configured over a DSL ATM interface using VLAN MUX
Mode.