Installation guide

Page 6-20 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6-
A
dvanced parameters
Field
Action
Default
value
Service Category
Select the type of service adapter to the traffic from the scroll
down list:
UBR without PCR: Unspecified Bit Rate
UBR with PCR: Unspecified Bit Rate
CBR: Constant Bit Rate
Non Realtime VBR: Variable Bit Rate
Realtime VBR: Variable Bit Rate
UBR
without
PCR
Select Scheduler
for Queues of
Equal Precedence
as the Default
Queue
These data packet scheduling techniques allow different
scheduling priorities to statistically multiplexed data flows.
Select in the drop-down list the required scheduler: Round
Robin (Weight=1) or Weighted Fair Queuing: (WFQ).
Round
Robin
(Weight=1)
Default Queue
Weight
Enter the Weight Value of the default queue between 1 and 63.
1
Default Queue
Precedence
Enter the precedence of the lowest queue between 1 and 8.
8
Peak Cell Rate
b
Enter a maximum number of cells transmitted per second,
between 1 and 2491.
-
Sustainable Cell
Rate
c
Enter an average number of cells transmitted per second.
Note: This number must be lower than the Peak Cell
Rate (PCR).
-
Maximum Burst
Size
c.
Enter the maximum number of cells emitted in burst (value
between 1 and 1000 000).
-
a. This value is delivered to you by your Internet Service Provider (ISP).
b. This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type
of service is selected.
c. These fields only appear when the "Non Realtime VBR" or "Realtime VBR" type of service is selected.
Encapsulation modes
DSL Link type
Action
Default
value
EoA
(Ethernet over ATM)
Select the encapsulation of your choice from the scroll down list.
LLC/SNAP-BRIDGING
VC/MUX
LLC/SNAP-
BRIDGING
PPPoA
(PPP over ATM)
Select the encapsulation of your choice from the scroll down list.
VC/MUX
LLC/ENCAPSULATION
VC/MUX
IPoA
(IP over
ATM)
Select the encapsulation of your choice from the scroll down list.
LLC/SNAP-ROUTING
VC/MUX
LLC/SNAP-
ROUTING