Installation guide

F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-19
6-
A
dvanced parameters





6.4.1.2 Add



• Click on the Add button to display the following screen:



ATM PVC Configuration


Field

Action
Default
value
VPI
Enter a VPI value
a
between 0 and 255.
0
VCI
Enter a VPI value
a.
between 32 and 65535.
32

Select DSL
Latency
Select the DSL Latency:
• Path0
• Path1




Select DSL Link
Type
Select the type of network protocol from the scroll down list:
• EoA: Ethernet over ATM
• PPPoA: PPP over ATM
• IPoA: IP over ATM
Note: EoA is for PPPoE and IPoE.
EoA



Select Connection
Mode
Select the connection mode:
• Default Mode - Single service over one connection
• VLAN MUX Mode - Multiple Vlan service over one connection
For more details, a summary table is presented below for each
type of protocol.


Encapsulation
mode
Select the encapsulation mode for the selected DSL link type.
For more details, a summary table is presented below for each
type of protocol.
LLC/SNAP
-
BRIDGING