Installation guide

6-
A
dvanced parameters
Page 6-106 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited






Field

Action/Meaning
Default
value

RADIUS Key
Enter the secret key shared between the authentication
server and its clients
-


WPA/WAPI
Encryption
Select the WPA encryption required from the scroll
down list:
• TKIP (Temporal Key Integration Protocol)
• AES (Advanced Encryption Standard)
• TKIP + AES
TKIP


WEP Encryption
Select from the scroll down list:
• Disabled to use WPA encryption only.
• Enabled to use both WPA and WEP encryption.
Disabled

WPA-PSK

Object: This encryption mode applies the functionalities of the WPA protocol with a pre-shared key, but
does not require an authentication server. The key is regenerated after a period which can be
configured (WPA Group Rekey Interval).

• Select the WPA-PSK security from the scroll down list; the following screen appears:


Field

Action/Meaning
Default
value



WPA/WAPI
passphrase
Enter the secret shared key. This may contain 8 to 63
ASCII characters or 64 hexadecimal symbols (256
bits).
Click on the Apply/Save button to validate the entry.
Note: You may display your secret phrase by clicking
on Click here to display.
ABCDEF23