Installation guide

6-
A
dvanced parameters
Page 6-60 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited







Field Action
Filter Name Enter a representative name for the filter.

IP Version
Select the dedicated IP version from the scroll down list (for
example: IPv4).

Protocol
Select the dedicated protocol from the scroll down list (TCP/UDP,
TCP, UDP, ICMP).
Source IP
address[/prefix
length]
Enter the Source IP address (WAN).

Source Port
(port or port:port)
Enter a "Source" port (WAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter
80:90.
Destination IP
address[/prefix
length]
Enter the destination IP address (LAN).

Destination Port
(port or port:port)
Enter a "destination" port (LAN) or range of ports.
Note: For one port, for example, enter 80.
For a range of ports, enter 80:90.

WAN interfaces


Field

Action
Default
value


Select All
Check the box to select all WAN interfaces.
Note: By unchecking the box, no interface is selected
and the other WLAN/LAN interfaces displayed
boxes become unchecked.
Checked
pppoe_0_8_32/ppp1 Check the box to select the displayed interface. Checked
br0/br0 Check the box to select the displayed interface. Checked


6.4.6.2 MAC Filtering



Object: This menu is used to create IP filters to refuse data from the LAN to the WAN and list the existing
outgoing IP filters.
• In the Advanced Setup menu, select Security > IP MAC Filtering