Installation guide

6-
A
dvanced parameters
F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-53





6.4.5.2 Port Triggering



Object: The purpose of this menu is to open dynamically the firewall ports (open ports) via "Trigger Ports"
when an application (such as games or video) opens a connection via the transport layer (TCP or
UDP).

• In the Advanced Setup menu, select NAT then select Port Triggering.
The following screen opens:

Field Meaning
Application Name Application name.


Trigger
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.


Open
• Protocol: Transport protocol (TCP, UDP or TCP/UDP).
• Port Range: A port range contains a Start port and an End port.
Note: A single port is characterised by an identical start port and end port.
WAN Interface WAN Interface used.

Remove
To remove an entry from the list, check the box and click on the [Remove]
button.