User manual

- 20 -
6-4-4 Audio and Video Output settings
In RECORDER SETTINGS, select A/V OUTPUT.
Check the manuals of your video equipment to know
what settings you need.
- HDMI RESOLUTION: select the output resolution
for your HD TV set (1080i, 720p or 576p). If you
have a standard TV, leave the setting at 576p.
- TV SCART: select the video standard (RGB,
PAL) for the TV output.
6-4-5 Recorder upgrade
The recorder automatically checks if new software is available for download. You can however manually
launch this operation and download updated software if available.
In RECORDER SETTINGS, select RECORDER
UPGRADE.
The recorder searches for new software.
For more information on this feature, refer to
“Software Update”, page 35.
6-4-6 Formatting the hard disk
In RECORDER SETTINGS, select FACTORY
RESET.
Enter your parental code and press .
Select FORMAT HARD DISK DRIVE and press .
If you format the hard disk, you lose all the recordings saved in the library.
This operation does not reset the channels and settings you made.
UG 253271393-B DTR94 HD Freesat UK.book Page 20 Vendredi, 16. octobre 2009 3:19 15