Operation Manual

42
Setting up...
The base
Enabling the pairing mode
The pairing mode needs to be enabled to pair an additional handset with
your D790 base.
You can either do this by pressing the button on the back of the base for
more than 4 seconds.
Or
you can use the handset Menu to activate it:
Your base will now remain in pairing mode for approximately a minute.
Please consult page 7 for more information about the base unit.
Menu > SETTINGS > ADVANCED SET. > SET BASE > REGISTR.MODE
Long press:
> 4 seconds
Note Your base will remain in pairing mode for about a minute.