Operation Manual

38
Setting up...
Enabling/Disabling keypad locking
This function lets you lock the keypad when you are not calling.
Follow the instructions on the screen and confirm.
Menu > SETTINGS > KEYPAD LOCK
(1 long press)
Note To unlock the keypad keep pressed for a few seconds.
Changing the default code
The base code is required to access certain security functions (banned
calls, reinitialising the base, etc.).
Enter the old and then the new code and confirm.
Menu > SETTINGS > ADVANCED SET. > CHANGE CODE
Allow/Prevent the sharing of a call with another
handset
Follow the instructions on the screen and confirm.
Menu > SETTINGS > ADVANCED SET. > SET BASE > INTRUSION
Note If you disable the intrusion mode, you will not be able to
share a call in progress with another handset (refer to
paragraph “Intrusion”, page 25).