Operation Manual

29
CC220R
9.7.1. MODIFYING THE NETWORK TYPE
Your telephone can be installed on a public or private network (when using a PABX).
This function enables you to configure your telephone according to the type of network.
•Go to SETTINGS / ADVANCED SET. / SET LINE / NETWORK TYPE.
• A screen presents the current status.
- To keep the status, press OK.
- To change the status, press Edit . The status is modified on the screen,
press OK.
9.7.2. MODIFYING THE DIALLING MODE
•Go to SETTINGS / ADVANCED SET. / SET LINE / DIAL.
• A screen displays the current status.
- To keep the status, press OK.
- To modify the status, press Edit . The status is modified on the screen,
press OK.
9.7.3. MODIFYING THE FLASH DURATION (R KEY)
If you connect your telephone to a private automatic branch exchange or use it in a foreign
country, you may need to modify the flash duration in order to use your telephone correctly
with regard to the following functionalities: outgoing 2nd call, incoming 2nd call, 3 way calling.
Contact your service provider to obtain the correct flash duration and then modify it by doing
the following.
•Go to SETTINGS / ADVANCED SET. / SET LINE / FLASHING.
• An information screen presents the current flash duration.
- To keep the duration, press OK.
- To modify the duration, press Edit .
Select the new duration, press OK.
9.7.4. SETTING A PABX PREFIX
If a private automatic branch exchange is used, you can programme the external call prefix.
With this function you can set the:
• PABX prefix number,,
• dialled number length at which point the PABX prefix will be automatically inserted (this
length is called “digit before prefix”),
• prefix status (on or off).
•Go to SETTINGS / ADVANCED SET. / SET LINE / PABX PREFIX.
• Press to modify this setting.
• Select the desired option:
The default dialling mode is tone.