Operation Manual

27
CC220R
•Go to SETTINGS / SECURITY / EMERGENCY.
• An information screen displays the current status.
- To keep the setting, press OK.
- To modify the setting, press Edit .
• A list of various executable actions appears:
- ACTIVATE :to activate the emergency number.
- DEACTIVATE : to deactivate the emergency number.
- CHANGE NO : to modify the emergency number.
• To modify the emergency number, select CHANGE NO, press OK.
• Enter the new number using the keypad.
•Press OK to confirm the number. The mode changes to active automatically.
9.5.3. DEFINING THE CALL TIME LIMIT
You can set your telephone’s operating time. Once the call time limit is used up, it is no longer
possible to make calls.
To be able to call again, you will have to deactivate the call time limit or set a new limit.
•Go to SETTINGS / SECURITY / TIME LIMIT.
• An information screen displays the remaining time limit and its status.
- To keep the setting, press Valid. .
- To modify the setting, press Edit . Enter the base code (default is 0000).
Press OK.
• A list of various executable actions appears:
- ACTIVATE : To activate the time limit.
- DEACTIVATE :To deactivate the time limit.
- EDIT TIME : To modify the time credit limit.
• To change the time credit length, select EDIT TIME, and press OK.
• Enter the new time limit using the keypad (maximum 999 minutes). Press OK.
9.5.4. DEFINING FORBIDDEN PREFIXES - CALL BARRING
You can prohibit the use of certain prefixes on your telephone. When a prefix is forbidden, it
becomes impossible to call numbers that begin by this prefix.
The following types of numbers should not be programmed: Fire, emergency
and police rescue services...
If the time limit ends during a telephone conversation, communication will not
be cut off. Once you have hung up, it will not be possible to make a new call.
Depending on the programmed prefixes, certain numbers will no longer be
accessible. For example, if you programmed 06 as a forbidden prefix, it will not
be possible to call a number that begins by 06.