Operation Manual

21
ADJUSTING THE VOLUME OF THE RING TONE
• Go to Phone setting / Ring level.
• Adjust the volume level (High / Medium / Low / Off) using keys
 or . Press , to confirm.
MODIFYING THE RING TONE
• Go to Phone setting / Ring melody.
• 8 ring tones are available. Select a ring tone using
keys or . Press to confirm.
ACTIVATING / DEACTIVATING KEY BEEPS
• Go to Phone setting / Key tone.
• Modify the setting using keys  or .
Press pour valider.
MODIFYING THE FLASH DURATION (KEY «R»)
If you connect your telephone to a private automatic branch
exchange, or if you have an enquiry call service (operator
service), you may have to modify the duration of the flash, which
is set to 250 milliseconds by default.
If you have to modify the duration of flashing, proceed as follows :
• Go to Phone setting / Set flash time.
• Select your desired flash duration using keys  or .
The duration is modified directly on the screen.
Press the key to confirm.
MODIFYING THE DIALLING MODE
If your telephone is connected to an old PABX, you may have to
modify the dialling mode.
• Go to Phone setting / Dialing type.
• Modify the dialling mode using keys  or .
Press to confirm.
When you activate the silence mode, there is no
particular icon displayed on the telephone screen.
The default dialling mode is tone.