User's Manual

57
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Call forwarding
You can forward incoming calls to another telephone extension always, on busy or on
no response and define each with different destinations. The destinations for forward-
ing are set via the configuration program, see "Setting up Internet telephony (VoIP)" on
page 40.
You activate or deactivate the desired function via the configuration program or directly
on the phone.
i
The key sequences described below are default settings and may be dif-
ferent for your VoIP provider. Please use the appropriate information of
your provider.
Key
sequence
Action: Activating "Forwarding always"
 Press the star key and then the keys 2 and 0.
All incoming calls are forwarded to the phone number defined in the
configuration program.
When Forwarding always is active and an incoming call is for-
warded, this is signalled by a splash ring (single ring).
If Forwarding always is active and you pick up the phone to make
an outgoing call 3 beep tones are played before the dialtone (Stut-
terdial Tone).
Action: Deactivating "Forwarding always"
 Press the star key and then the keys 2 and 1.
Call forwarding will be deactivated.
Action: Activating "Forwarding on busy"
 Press the star key and then the keys 3 and 0.
If your connection is busy, all incoming calls are forwarded to the
phone number defined in the configuration program.
Note: The Forwarding on busy and Call waiting functions cannot
be activated both in parallel.
Action: Deactivating "Forwarding on busy"
 Press the star key and then the keys 3 and 1.
Call forwarding on busy will be deactivated.
Action: Activating "Forwarding on no response"
 Press the star key and then the keys 4 and 0.
If incoming calls are not answered, they are forwarded to the phone
number defined in the configuration program.