User's Manual

56
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Ending a conference call
You want to end the call to subscriber B.
You want to end the conference call with both parties.
Subscribers A and B can quit the conference call at any time by hanging up. The con-
nection to the remaining subscriber continues.
Call transfer during conference
You have initialised a conference call with subscriber A and subscriber B and now you
want to back out of the conference call. Subscriber A and Subscriber B should remain
connected.
Key
sequence
Action
 Press the R button.
The connection to subscriber B is terminated and you continue with
your call to subscriber A.
Key
sequence
Action
 Hang up the receiver.
The conference call is terminated.
Key
sequence
Action
You are on the phone to subscriber A and subscriber B.
 Hang up the receiver.
The conference is terminated for you. Subscriber A and subscriber
B remain connected.
i
The Call transfer and Call transfer during conference functions must
have been activated using the configuration program ( page 40).