User's Manual

55
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Call transfer
You are on the phone to subscriber A and you want to transfer the call to subscriber B.
Conference calling
You want to make a conference call to two other parties.
If you press the R button while the call is being connected to subscriber B, the call setup
is cancelled and you continue with your call to subscriber A.
Key
sequence
Action
You are on the phone to subscriber A.
 Press the R button.
Subscriber A is put on hold.
 Dial the number for subscriber B.
The connection to subscriber B is established.
 Hang up the receiver.
Subscriber A and subscriber B are connected.
i
The Call transfer function must be activated via the configuration pro-
gram (
 page 40) and must be available at the other subscribers.
Key
sequence
Action
 Pick up the receiver.
 Dial the number for subscriber A.
The call is connected. Subscriber A answers.
 Press the R button.
Subscriber A is put on hold.
You hear the dialling tone for a second call.
 Dial the number for subscriber B.
The call is connected. Subscriber B answers.
 Press the R button.
The conference call between you, subscriber A and subscriber B is
set up.