User's Manual

54
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Accepting a call waiting
You are on the phone to subscriber A. A call comes in from subscriber B. You want to
accept the call from subscriber B and end the call to subscriber A.
Alternating between callers (call holding)
You are on the phone to subscriber A. A call comes in from subscriber B. You want to
accept the call from subscriber B without ending the call to subscriber A.
Key
sequence
Action
You are on the phone to subscriber A.
During the call you hear the “call waiting” tone.
 Hang up the receiver to end the call to subscriber A.
 Pick up the receiver again.
You will be connected to subscriber B.
i
A waiting call is only signalled on your phone if the Call waiting function
is activated. You can make the desired settings via the configuration pro-
gram (
 page 40).
Key
sequence
Action
You are on the phone to subscriber A.
During the call you hear the “call waiting” tone.
 Press the R button.
Subscriber A is put on hold.
You are connected to subscriber B.
 Press the R button.
Subscriber B is put on hold.
You are reconnected to subscriber A.