User's Manual

53
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Consultation Call
You are on the phone to subscriber A. During the call you want to call subscriber B with
an enquiry. When you finish talking to subscriber B, you want call A to be restored.
If you cannot get through to subscriber B
Key
sequence
Action
You are on the phone to subscriber A.
 Press the R button.
Subscriber A is put on hold.
You hear the dialling tone for the second call.
 Dial the number for subscriber B.
The call is connected and you can talk to subscriber B.
 Hang up the receiver to end the call.
You will receive an automatic callback from subscriber A.
 Pick up the receiver and resume the call to subscriber A.
Key
sequence
Action
If you cannot get through to subscriber B because the line is busy,
you will hear the busy tone.
either
 Hang up the receiver to end the call.
You will receive an automatic callback from subscriber A.
 Pick up the receiver and resume the call to subscriber A.
or
 Press the R button.
Your call to subscriber A will be reconnected.