User's Manual

52
Making a phone call or faxing with the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Operation.fm / 17.5.11
Schablone 2011_04_07
Making calls via VoIP
Make telephone calls in the same way as on a conventional phone: dial as usual or use
the directory to dial. The Phone LED flashes green.
Receiving VoIP phone calls
Your PC does not need to be switched on for you to receive calls. You only need the
SX682 WiMAX to be ready for operation (Phone LED lights up green).
For you to receive calls via VoIP, let potential callers know your VoIP phone number.
You will find your VoIP phone number in the documentation supplied by your provider.
As soon as a call comes in on your VoIP phone, the Phone LED starts to flash green
and the phone rings. When you lift the receiver or press the connect button, your SX682
WiMAX will provide the appropriate bandwidth for voice transmission. If you are surfing
the Internet at the same time, the data might be transmitted slightly more slowly, similar
to when downloading several large data packets. The call is made in the same way as
via a conventional phone line. When you have ended the call, the Phone LED glows
green again and your SX682 WiMAX makes the entire bandwidth available for data
transfer.
Telephone functions
This section describes the telephone functions available via the phone socket of your
SX682 WiMAX.
Telephoning
You want to call someone.
Key
sequence
Action
 Lift the receiver.
 Dial the number you want to call.
The call is connected.
 Hang up the receiver to end the call.