User's Manual

49
Device status
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Status.fm / 17.5.11
Schablone 2011_04_07
Device status
Status > Device Status
The device status of your SX682 WiMAX is displayed in the Device Status submenu.
 If necessary, click the Refresh button to refresh the data in the status display.
Radio status
Status > Radio Status
Information about the radio connection to the WiMAX network is displayed in the Radio
Status submenu.
System uptime Operating time of your SX682 WiMAX since it was last
restarted. The operating time is given in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
System time Displays the current date and time. This information is trans-
mitted to your SX682 WiMAX by the WiMAX network.
Operating Mode Role played by your SX682 WiMAX during connection setup to
the Internet (Router or Bridge).
Device temperature Current device temperature inside your SX682 WiMAX. In the
event of overheating, the SX682 WiMAX switches off.
System Log Error protocol in which you will find information about prob-
lems.
Connected to a base station
Indicates whether or not your SX682 WiMAX is connected to a base station.
Base station ID
ID number of the base station to which the device is connected.
MAC state
Status of the connection setup to the base station. The information shown here is
only intended for technically experienced users. Under Connected to a base sta-
tion is shown whether a connection to a base station exists.
Authentication
Indicates whether an authentication method is used for the WiMAX connection.
Protocol
Protocol used for authentication.
Received power level
Receive level from the WiMAX base station. Values in the range -70 dBm to -
10 dBm are considered optimum. You can ensure this by optimising the antenna
direction.