User's Manual
Table Of Contents
- SX682 WiMAX
- User Guide - User
- Contents
- For your safety
- SX682 WiMAX
- Installing the SX682 WiMAX
- Configuration with the Web browser
- Basic Setup Wizard
- Advanced Settings
- Administration
- Status
- Using the SX682 WiMAX
- Appendix
- Glossary
- Index
29
Basic Setup Wizard
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Basic_configuration.fm / 17.5.11
Schablone 2011_04_07
First check your access data by going back to the WiMAX configuration page
(
page 27).
If you have entered your access data correctly, adjust the antenna.
If you are using the integrated antenna:
Turn your SX682 WiMAX by approx. 45°.
Click Ok to restart the scan.
If the scan has still not been successful with the alignment changed:
Place the SX682 WiMAX by a window that faces a different direction.
If necessary, repeat the scan with all possible locations and alignments.
If necessary, ask your provider for the location of the nearest WiMAX network base
station and select a location for your SX682 WiMAX that points towards this base
station.
The best results will be obtained if the SX682 WiMAX is in sight of a WiMAX network
base station.
Correct:
Incorrect:
i
You must not move the SX682 WiMAX during the scan. You should
therefore always place the SX682 WiMAX upright and on a level surface
directly by the window.