User's Manual

28
Basic Setup Wizard
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Basic_configuration.fm / 17.5.11
Schablone 2011_04_07
Selecting the antenna
 Select whether you want to operate your SX682 WiMAX with an outdoor antenna
or the integrated one.
– Click the first option button if you want to use the integrated antenna. Your
SX682 WiMAX must be positioned by the window with the cable connections
pointing inwards and must be connected.
– Click the second option button if your SX682 WiMAX came with an outdoor
antenna. This antenna must have been installed and connected by an electrical
specialist.
 Click Next.
Adjusting the antenna
 If you are using the integrated antenna, adjust your SX682 WiMAX by the window.
If you are using the outdoor antenna, this must already be installed and facing
towards the base station, see "Installing the SX682 WiMAX" on page 13.
 Click Next.
Establishing a radio connection to a WiMAX network
The Basic Setup Wizard will now scan the frequencies to establish an initial radio con-
nection to a WiMAX network.
The frequency scan begins automatically. A progress bar indicates how far the scan
has progressed. In addition, you will see in the Remaining time area roughly how
much time is still needed for the complete scan. Depending on how your SX682 WiMAX
has been preconfigured by your provider, the scan can last several minutes before the
first radio connection is established.
As soon as a radio connection has been established with a WiMAX network, the scan
will end. The progress bar is fully filled in and the display in the Remaining time area
jumps to 0 seconds.
 If the scan has been successful, read on in Chapter "Precisely aligning the antenna"
on page 30.
If the scan was not successful:
Both the integrated antenna and the outdoor antenna are directional antennas; this
means that they must at least be pointing roughly in the direction of a WiMAX network
base station in order to establish a radio connection. The access data must also have
been entered correctly.
If the scan was not successful:
i
During the scan, the SX682 WiMAX or antenna must not be moved; this
is the only way to guarantee a complete scan with the current antenna
alignment.