User's Manual

26
The Home page
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Basic_configuration.fm / 17.5.11
Schablone 2011_04_07
The Home page
Once you have logged in successfully to the SX682 WiMAX, you will see the Home
page for the device software. The start screen offers an overview of all areas of the con-
figuration program:
In the area to the right of the start screen, you will see the connection status of your
SX682 WiMAX:
 connected = The SX682 WiMAX has established a radio connection with a WiMAX
network. You will see the connection duration in brackets and in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
 disconnected = The SX682 WiMAX is trying to establish a connection with a
WiMAX network.
To configure your SX682 WiMAX, use the Basic Setup Wizard, which will help you
establish a radio connection.
Connecting to the Internet manually
Once you have configured your Internet access (see page 27 and page 35), you can
establish a manual connection to the Internet on the start screen if you have selected
Connect on demand as the Connection mode.
To establish or end an Internet connection manually:
 Open the start screen of the SX682 WiMAX as described on page 21.
 If you have already started the user interface, click the Home tab at the top left of
the window.
 Click Connect to establish a connection to the Internet.
 Click Disconnect if you no longer require the connection.
Menu Description
Basic Setup Wizard Perform the basic configuration and set up the radio
connection to the WiMAX network (
 page 27).
Advanced Settings Perform advanced configuration and administration
tasks ( page 33).
Status Obtain information on the status of your SX682 WiMAX
(
 page 46).