User's Manual

18
Connecting the SX682 WiMAX
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Installation.fm / 17.5.11
Schablone 2011_04_07
Connecting a telephone, fax machine or answer machine
You can connect an analogue terminal, such as a telephone with cord, cordless tele-
phone, fax machine or answer machine, and operate them via the Internet in future
(Internet telephony/VoIP).
If your analogue terminal has a TAE plug, first connect this to the adapter (connect a
telephone to the F-coded socket, a fax machine or answer machine to the N-coded
socket). Then connect the adapter plug to the Phone connection on the SX682
WiMAX.
 If necessary connect the telephone, fax machine or answer machine to the mains
power supply.
Switching on the devices
 Connect the mains adapter plug to the SX682 WiMAX socket.
 Power up the PC.
 Connect the mains adapter to the mains power supply.
The system starts up and performs a self-test. After the self-test, the SX682 WiMAX
continually attempts to register with a WiMAX network. Registration may be suc-
cessful immediately. If not, registration will take place when the SX682 WiMAX is
being configured.
i
Depending on the connection plug on your analogue terminal, you may
require an additional adapter (TAE socket on the RJ11 plug).
 Connect the plug on the ana-
logue terminal to the Phone
connection on the SX682
WiMAX.
!
Only use the SX682 WiMAX with the mains adapter supplied.