User's Manual

12
Product overview
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Product_intro.fm / 17.5.11
Schablone 2011_04_07
Phone: tele-
phone
Lights up green The phone connection is active and regis-
tered with a VoIP provider. You can make
calls via the Internet.
Does not light up The telephone connection is not active or not
registered with a VoIP provider. You cannot
make calls via the Internet.
Flashes green The connected telephone is active: it is being
used to make a call or there is an incoming
call.
RSSI:
signal quality
0 to 4 LEDs light
up green
The LEDs on the SX682 WiMAX help you to
position the antenna more easily. The LEDs
indicate the signal quality; the more LEDs
that light up, the better the signal reception.
All 4 LEDs flash
green
The SX682 WiMAX is being reset to the fac-
tory settings; see "Returning the SX682
WiMAX to factory settings" on page 20.
i
The connection quality can be detected in two different ways:
 CINR (Carrier to Interference and Noise Ratio) measures the signal
quality.
 RSSI (Received Signal Strength Indication) measures the signal
strength.
The LEDs indicate either RSSI or CINR values. The used method is pre-
configured by your operator. If RSSI is used the RSSI 1 - RSSI 4 LEDs
will show the signal strength.
Name LED Meaning