User's Manual

11
Product overview
SX682 WiMAX / engbt / SX682_FUG_EN_9 / Product_intro.fm / 17.5.11
Schablone 2011_04_07
 For information about the optional outdoor antenna, please refer to "Connecting the
outdoor antenna" on page 16.
 For information on connecting the mains adapter, please refer to "Switching on the
devices" on page 18.
 For information on the reset button, please refer to "Restarting and resetting the
SX682 WiMAX" on page 19.
 For information on the Ethernet port, please refer to "Connecting the PC" on
page 17.
LEDs
The LEDs indicate the status of the SX682 WiMAX and the current signal strength.
Name LED Meaning
Power: power
supply
Lights up green The SX682 WiMAX is powered correctly.
Does not light up The SX682 WiMAX is not powered correctly
or the power supply has failed.
Online: active
connection
Lights up green The SX682 WiMAX is registered with a
WiMAX network and ready for use.
Does not light up The SX682 WiMAX is not registered with a
WiMAX network; it is not possible to estab-
lish an Internet connection.
Flashes green The SX682 WiMAX is establishing a connec-
tion with a WiMAX network.
Lights up red The SX682 WiMAX is not ready. Possible
cause: device is overheating or faulty.
LAN: Ethernet
port
Lights up green Correct cable connection with a powered
connection partner.
Does not light up No or incorrect cable connection.
Flashes green Data transfer via the Ethernet port.
RSSI: signal quality
LAN: Ethernet port
Online: active connection
Power: power supply
Phone: telephone (VoIP)