User's Manual

44
Local network LAN
SE681 WiMAX / engbt / SE681_FUG_EN_9 / Status.fm / 18.5.11
Schablone 2011_04_07
Local network LAN
Status > Local Network
The configuration of the local network is displayed in the Local Network submenu.
 If necessary, click the Refresh button to refresh the data in the status display.
Device status
Status > Device Status
The device status of your SE681 WiMAX is displayed in the Device Status submenu.
 If necessary, click the Refresh button to refresh the data in the status display.
IP address IP address used by the SE681 WiMAX in your local network.
Default: 192.168.2.1
Subnet mask Subnet mask of your local network. Default: 255.255.255.0
MAC address The MAC address uniquely identifies a network component
within a network, in this case the local MAC address of your
SE681 WiMAX within your local network.
DHCP server Displays whether the DHCP server of your SE681 WiMAX is
activated. As DHCP server, your SE681 WiMAX assigns an IP
address to all the PCs in the network. If the DHCP server is
activated, you will see the network subscribers that have
received your IP address from the DHCP server in the DHCP
clients field. DHCP must be activated on a PC for the PC to
receive an IP address from the DHCP server. For more infor-
mation see the document "Configuring the local area network"
on the product CD.
System uptime Operating time of your SE681 WiMAX since it was last
restarted. The operating time is given in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=seconds).
System time Displays the current date and time. This information is trans-
mitted to your SE681 WiMAX by the WiMAX network.
Operating Mode Role played by your SE681 WiMAX during connection setup to
the Internet (Router or Bridge).
Device temperature Current device temperature inside your SE681 WiMAX. In the
event of overheating, the SE681 WiMAX switches off.
System Log Error protocol in which you will find information about prob-
lems.