User's Manual

25
Basic Setup Wizard
SE681 WiMAX / engbt / SE681_FUG_EN_9 / Basic_configuration.fm / 18.5.11
Schablone 2011_04_07
Basic Setup Wizard
The Basic Setup Wizard helps you start up your device and guides you step by step
through the configuration process with the most important settings.
The Basic Setup Wizard comprises the following steps:
 Entering the access data for the WiMAX network
 Configuring the Internet access
 Selecting the antenna
 Positioning the device
 Scanning the frequencies to establish a radio connection with a WiMAX network
 Exact alignment of the antenna to optimise the quality of the connection
Starting the Basic Setup Wizard
 To start the Basic Setup Wizard, click the Basic Setup Wizard tab.
 Click Next.
Entering access data for the WiMAX network
On this page you enter the data for authentication of your device on the WiMAX base
station. You will need the access data supplied by your WiMAX operator for this.
 Activate the Authentication option, if this is required by your WiMAX operator.
 Enter the access data and click Next.
Setting up Internet access
To allow users in your local network access to the Internet, set up the Internet connec-
tion of your device using the information supplied by your Internet provider.
 Enter the access data and click Next.
i
You can check all the configuration settings that you make with the Basic
Setup Wizard later via the Advanced Settings menus and, if necessary,
change them, see "Advanced Settings" on page 30.
i
Depending on the pre-configuration of your device some of the menu
entries and configuration possibilities might be missing in your device.
i
Your SE681 WiMAX can be used as an Internet router or bridge. For
more on this see "Setting the operating mode" on page 31.