User's Manual
Table Of Contents
- SE681 WiMAX
- User Guide - User
- Contents
- For your safety
- SE681 WiMAX
- Installing the SE681 WiMAX
- Configuration with the Web browser
- Basic Setup Wizard
- Advanced Settings
- Administration
- Status
- Using the SE681 WiMAX
- Appendix
- Glossary
- Index
23
User interface
SE681 WiMAX / engbt / SE681_FUG_EN_9 / Basic_configuration.fm / 18.5.11
Schablone 2011_04_07
Opening online Help
There is an online Help for each screen of the configuration program, which you can
open directly on the screen.
Click the question mark button at the top right.
The online Help is shown in the right pane of the configuration program.
If necessary, click Open Help window to open the online Help in a separate
window.
Menu structure
The menu of the user interface on your SE681 WiMAX is split into the following main
areas: Home, Basic Setup Wizard, Advanced Settings and Status. Under these
menu options, you will find the following areas:
Menu Description
Home
Start page and starting point for all configuration and administra-
tion tasks. It also shows the connection status and allows you to
set the language, see "User interface" on page 19.
Basic Setup Wizard
Establish a connection to the WiMAX network, optimise the
antenna direction and set up your Internet connection , see "Basic
Setup Wizard" on page 25.
Advanced Settings
Configure your Internet access and your local network and per-
form administration tasks. For example, you can enter a system
password for access to your SE681 WiMAX or change it, see
"Configuration with the Web browser" on page 19.
Status
Obtain information on the operating status of your SE681 WiMAX
and read off the device and version numbers as well as IP
addresses; see "Status" on page 42.
Internet See "Internet" on page 43.
Local Network See "Local network LAN" on page 44.
Device Status See "Device status" on page 44.
Radio Status See "Radio status" on page 45.