User's Manual
Table Of Contents
- SE680 WiMAX
- User Guide
- Contents
- For your safety
- The SE680 WiMAX
- Installing the SE680 WiMAX modem
- Configuration with the Web browser
- Basic Setup Wizard
- Advanced Settings
- Administration
- Status
- Using the SE680 WiMAX
- Appendix
- Glossary
- Index
9
Scope of delivery
SE680 WiMAX / engbt / SE680_FUG_EN-7 / Product_intro.fm / 13.5.11
Schablone 2011_04_07
Connectors and LEDs
1
Connector for the two-pin power lead, see "Switching on the
devices" on page 14.
2 CONNECT
The LED shows whether or not the indoor unit is properly con-
nected with the outdoor modem.
Green: The indoor unit is properly connected with the out-
door modem.
3 FAULT
The LED shows whether or not the indoor unit is properly con-
nected with the outdoor modem.
Red: The connection between the indoor unit and the out-
door modem is faulty.
4ON
The LED shows that power is being supplied.
Green: The SE680 WiMAX modem is powered correctly.
5IN
Ethernet connector for data exchange with a PC or network
(RJ45, 10/100 Base T), see "Connecting a PC or switch" on
page 12.
6OUT
Ethernet connector for connection with the outdoor modem
(RJ45, power supply and data transmission), see "Connecting
the outdoor modem" on page 12.
7
Clips for wall mounting
1
2
3
4
5
6
7