User's Manual
Table Of Contents
- SE680 WiMAX
- User Guide
- Contents
- For your safety
- The SE680 WiMAX
- Installing the SE680 WiMAX modem
- Configuration with the Web browser
- Basic Setup Wizard
- Advanced Settings
- Administration
- Status
- Using the SE680 WiMAX
- Appendix
- Glossary
- Index
45
Troubleshooting
SE680 WiMAX / engbt / SE680_FUG_EN-7 / Appendix.fm / 13.5.11
Schablone 2011_04_07
Allowing pop-up windows
Pop-up windows are small windows that are opened either as the result of an action or
automatically. The device software for your SE680 WiMAX modem uses pop-up win-
dows to display the online Help, for example.
Many Internet sites, however, call up distracting pop-up windows for effective advertise-
ment placement, for example, without detracting from the layout of the site itself. To pre-
vent these pop-up windows from opening, current Web browsers offer pop-up blockers.
If necessary, you can configure the pop-up blocker to display desirable pop-up windows
and to block undesirable windows.
Internet Explorer 7.0:
Open Internet Explorer.
Click on Tools and then on Pop-up Blocker and choose Pop-up Blocker Set-
tings.
Enter the IP address of your SE680 WiMAX modem as the Website address:
192.168.2.1
Click on the Add button.
Click on Close to apply the settings.
Firefox 3.0:
Open Firefox.
Click on Tools and then on Settings.
Click on Content.
If the Block pop-up windows check box is activated, click to its right on Excep-
tions.
Enter the IP address of your SE680 WiMAX modem as the Website address:
192.168.2.1
Click on the Allow button.
Click on Close and on OK to apply the settings.
i
If you are using a different pop-up blocker, configure it to allow pop-up
windows for the IP address 192.168.2.1.