User's Manual Part 1

13 Philips · PPX3610
Initial Installation
1 Push for about 3 seconds the on/off switch on the
side to turn the device on.
2 Turn the device towards a suitable projection sur-
face or wall. Note that the distance to the projection
surface must be a minimum of 0.5 meters and a max-
imum of 5 meters. Make sure the projector is in a
secure position.
3 Use the focus wheel on the top to adjust the image
sharpness.
4 Select the desired menu language using .
5 Confirm with .
The Main Menu Appears Instead of
the Language Selection
The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
1 Use the navigation keys to select Set-
tings.
2 Confirm with .
3 Select with  Language.
4 Confirm with .
5 Select the desired language with .
6 Confirm with .
7 Exit with .
Notice