User's Manual

page 53/64
Note d’étude / Technical document : URD1– OTL
5665.3 – 003 / 72238 Edition 01
Document Sagemcom Reproduction et divulgation interdites
Sagemcom document. Reproduction and disclosure prohibited
10.6.1 Nozzles

SAGEMCOM recommends using SMT machine with nozzle diameters up to 8 mm in order to always have
best prehension of the HiLoNC V2 module.

SAGEMCOM recommends using the following two references of nozzles:
• For the UNIVERSAL GSM FLEXJET the nozzle 340F
Figure 53 : Flexjet nozzle 340F
• For the SIEMENS, the nozzle type 417
Figure 54 : Siemens nozzle 417