User's Manual

page 44/64
Note d’étude / Technical document : URD1– OTL
5665.3 – 003 / 72238 Edition 01
Document Sagemcom Reproduction et divulgation interdites
Sagemcom document. Reproduction and disclosure prohibited

For antenna detection presence circuit refer to the dedicated document:
URD1 OTL 5365.1 065 71466 ed 01 - Hilo-HiLoNC Antenna Detection
Figure 44: Antenna detection circuit
7.2 GROUND LINK AREA
SAGEMCOM emphasizes the fact that a good ground GND contact is needed between the module and the
customer’s board to have the best radio performances (spurious, sensitivity…).

All HiLoNC V2 GND pads must be connected to the GND of the customer’s board.