User's Manual

page 30/35
Note d’étude / Technical document : URD1– OTL 5665.1– 002 / 70 884 Edition 03
Document Sagem Communications Reproduction et divulgation interdites
Sagem Communications document. Reproduction and disclosure prohibited
Soak requirements Level Floor Life
Standard Accelerated Equivalent
Time Conditions Time (hours) Conditions Time (hours) Conditions
3 168 hours <= 30°C/60% RH 192 +5/-0 30°C / 60% RH 40 +1/-0 60°C / 60%RH
It means that the customer’s factory must process and solder the HiloNC on the customer’s board at least 168
hours (7 days) after the HiloNC sealed package have been opened. This duration is given for factory floor
conditions of T°<30°C, HR 60%.

If this duration can not be fulfilled, the HiloNC part must be baked again.
9.2 PACKAGE
The HiloNC module is delivered in Tape and Reel package which is hermetically sealed to prevent from moisture
and ESD.
The characteristics of the T&R are given in the drawing below.