User's Manual

URD1

– OTL 5696.1–

022

/ 72740 Edition 0.4

HILONC-

3GPS

APPLICATION

NOTE

10.5

SMT

Machine

10.5.1

Nozzles

SAGEMCOM recommends using SMT machine with nozzle diameters up to 10 mm in order to always have

best prehension of the HILONC-3GPS module.

SAGEMCOM recommends using the following references of nozzles:

For the Panasonic, the nozzle 1005

10.5.2

Fiducials

There is no fiducials design on the bottom side of the HILONC-3GPS.

10.6

Underfill

The HILONC-3GPS

’s

shield

did not be designed accordingly to allow this underfill process.

10.7

Second

reflow

soldering

Even if SAGEMCOM recommends a single reflow soldering, a second reflow soldering can be conceivable.

Positive tests have been performed with HILONC-3GPS on the bottom side.

Note d’étude / Technical document :

01/08/20111

Page