User's Manual

page 37/51
HiAll
NC
User Manual 2012/06/28
The RESET signal will reset the registers of the CPU and reset the RAM memory as well.

As RESET is referenced to VGPIO domain (internally to the module) it is impossible to make a reset
before the module starts or try to use the RESET as a way to start the module.
An other solution more costly would be to use MOS transistor to switch off the power supply and restart the
power up procedure using the POK_IN input line
6.3 POWER ON AND SLEEP DIAGRAMS
Those 2 diagrams show the behaviours of the module and the DTE during the power on and then in the sleep
modes.