User's Manual

5
D680C
C
Customer Information
1
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the b
bottom
of this equipment is a label that contains, among other
information, a product identifier in the format
US:AAAEQ##TXXXX
. If requested, this
number must be provided to the telephone company.
2
An applicable certification jacks Universal Service Order Codes (USOC) for the
equipment is provided (i.e., R
RJ11C
) in the packaging with each piece of approved
terminal equipment.
3
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
4
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. [For products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format
US:AAAEQ##TXXXX
. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is separately shown on the label.]
5
If this equipment [US:
NS3W400BD680C
causes harm to the telephone network, the
telephone company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn't practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
6
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
7
Should you experience trouble with this equipment, please contact [US: NS3W400BD680C
for repair or warranty information, Service can be facilitated through our office at:
U.S. Agent Company name:
Address:
Tel:
MU 25XXXXXX-A_D680C_US.book Page 5 Dimanche, 2. septembre 2012 9:51 09
Sagemcom USA LLC
14651 N.Dallas Parkway,Suite 900 DALLAS TEXAS 75254 US
[phone]