User's Manual

48
D680C
Setting up...
Allow three-way communication (Intrusion)
This intrusion function allows or prohibits a second handset registered on the same
base to share an ongoing conversation. If the intrusion mode is enabled, you will
then be able to share a call in process with another handset.
• Press MMenu .
• Select SSettings, press OOK.
• Select AAdvanced settings using the  or  keys and press OOK.
• Select SSet line using the  or  keys and press OOK.
• Select CConfiguration using the  or  keys and press OOK.
• Select IIntrusi
on using the  or  keys and press OOK.
• Change the status using the keys orand press OOK.
The action is confirmed by the indication "OOK".
NNote The intrusion is inactive if the simultaneous function is enabled.
Changing the flash duration
You can configure the flash duration if you use your phone abroad or on private
PABX network, you may need to modify the flash duration in order to use your
telephone correctly with regard to the following functionalities: outgoing 2nd call,
incoming 2nd call, 3 way calling.
Please contact your service provider to obtain the correct flash duration and then
modify it by doing the following.
• Press M
Menu .
• Select SSettings, press OOK.
• Select AAdvanced settings using the  or  keys and press OOK.
• Select SSet line using the  or  keys and press OOK.
• Select FFlash time using the  or  keys and press OOK.
• Select EEdit using the  or  keys and press OOK.
• Select the appropriate flash duration using the 
or  key and press OOK.
The action is confirmed by the indication "OOK".
MU 25XXXXXX-A_D680C_US.book Page 48 Dimanche, 2. septembre 2012 9:51 09