User's Manual

45
D680C
Setting up...
The base
Changing the base code
The base code (PIN number) is 0000 by default, but can be changed to 4 other
numbers. You will be prompted to enter it, for example, when registering a new
handset.
• Press M
Menu
.
• Select S
Settings
, press O
OK
.
• Select A
Advanced settings
using the  or  keys and press O
OK
.
• Select S
Set base
using the  or  keys and press O
OK
.
• Select C
Change code
using the  or  keys and press O
OK
.
• At the "O
Old code
" prompt, enter the old 4-digit code and then confirm by
pressing O
OK
.
• At the "N
New code
" prompt, enter the new 4-digit code and then confirm by
pressing O
OK
.
• At the "C
Confirm code
" prompt, enter the new code again and then confirm by
pressing O
OK
.
• The action is confirmed by the "O
OK
" indication.
Resetting the base
When you reset your base, all the settings are returned to their initial values (factory
settings), except for the phonebook.
• Press M
Menu .
• Select SSettings, press OOK.
• Select AAdvanced settings using the  or  keys and press OOK.
• Select SSet base using the  or  keys and press OOK.
• Select RReset base using the  or  keys and press OOK.
• On a confirmation request "BBase reset ?", press OOK
.
• The action is confirmed by the "OOK" indication.
MU 25XXXXXX-A_D680C_US.book Page 45 Dimanche, 2. septembre 2012 9:51 09