User's Manual

42
D680C
Setting up...
The handset
Associating a new handset
The base allows you to pair other handsets with the base. You then have to pair
them so that they are recognized.
FROM THE BASE:
To enable the pairing mode, press and hold (on the bottom of the base).
FROM THE HANDSET:
Case 1:
The handset displays "P
Please Register
".
• Press O
OK
.
• The handset displays: " P
Put the base in registration & press OK
".
Case 2:
• Press M
Menu
.
• Select S
Settings
, press O
OK
.
• Select A
Advanced settings
using the  or  keys and press O
OK
.
• Select S
Set handset
using the  or  keys and press O
OK
.
• Select R
Registration
then press O
OK
.
• The handset displays: " P
Put the base in registration & press OK
".
• Place your base in pairing mode (see previous paragraph).
• On the handset, press O
OK
.
• The message "S
Search
" is displayed.
• Once the base is detected, its name is displayed on the handset screen.
• Press O
OK
to confirm.
• The message "R
Registration in progress
" is displayed.
• The message "R
Registered
" is displayed.
• You then automatically exit the pairing mode.
N
Note
The standard pairing of a new handset is automatic if the default
pin number (0000) has not been changed.
Otherwise a message E
Enter code
prompts you to enter the new
PIN number.
If an error occurs, the message R
Registration Fail
is displayed
prompting you to repeat the whole procedure.
MU 25XXXXXX-A_D680C_US.book Page 42 Dimanche, 2. septembre 2012 9:51 09