Installation Instructions

5
desktop :
The‘ ’ icon then appears in the System Tray (in the bottom right corner of your task bar).
Double-click this icon and the main
screen of the Utility shows up as seen
opposite.
Configuration of your Wireless LAN adapter in Infrastructure Mode
To access Internet your Wireless LAN adapter must be set in Infrastructure Mode as seen below.
In the main screen of the Utility, click the down arrow at
the right of the Network Type field and select
“Infrastructure”
Selection of the SSID
The SSID is a string of characters identifying a wireless network (it is the name of this network). To
belong to a same wireless network, the client stations and the access point (connected to the
Internet) have to use the same SSID.
If you keep the SSID field to ANY (default value), your
adapter will attach itself to the nearest access point (or to
the one sending the higher radio signal).
If you know the name of the access point you want to associate with, enter this SSID in the
corresponding field and then click “Apply” button to make the setting take effect.
The SSID can be set up to 32 characters. It is case sensitive (please take great attention to that).
Configuration of the Encryption parameters
To prevent unauthorized wireless station from accessing data transmitted over your network, the
Wireless LAN adapter offers secures data encryption, like “open” and “shared Key” authentication
with WEP (Wired Equivalent Privacy) encryption or WPA-
PSK (Wi-Fi Protected Access – Pre