Installation Instructions

10
Please refer to the above explanations.
The configuration of your Wireless LAN adapter in Ad-Hoc mode is finished.
About Status Information on your Wireless LAN USB
adapter LED Indicator
The SAGEM Wi-Fi 11g USB ADAPTER has one LED indicator giving the following informations on
the link status:
♦ Solid Green: Connected to an Access Point or Ad-Hoc wireless workstation and
transmitting data.
♦ Blinking Green: Attempting connection to the Access Point or Ad-Hoc wireless workstation
I. On the WLAN utility under Windows :
Icon of the WLAN utility
The color behind the system tray icon indicates the link status :
Blue indicates a good or excellent link.
Yellow indicates a usable but weak link.
Red indicates no or very poor link quality.
Status field on the Configuration Menu of the WLAN utility
The Status field on the Configuration menu provides more detailed information.
State : When operating in Infrastructure mode, this field shows the MAC address of
the Access Point with which the SAGEM Wi-Fi 11g USB ADAPTER is
communicating. When operating in Ad-Hoc mode, it shows the virtual MAC
address used by computers participating in the Ad-Hoc network.
Current Channel : Shows the radio channel on which the connection is made.
Current Tx Rate : Shows the highest transmit rate of the current 54 Mbps to 1 Mbps.