Operation Manual

3
1. Insert the Product CD-ROM into the CD-ROM drive of your computer.
2. An Auto-run is automatically executed and the
following screen comes up. If not, run the
“Autorun.exe” on the CD-ROM
Select in the list your adapter model.
Please, read the model information directly on
your equipment.
The menu offers the following choices :
♦ Install the Wireless LAN Utility and driver
♦ Read the present manual
To launch the installation, click “Wi-Fi adapter
install”
A first screen shows up. Click “Continue” to continue. Follow the on-screen instructions to install
the Wireless LAN Utility.
When this screen shows up, go to the next
chapter to execute the hardware installation of
your SAGEM Wi-Fi 11g USB ADAPTER, then
click on “OK”.
I.2 Hardware installation of the SAGEM Wi-Fi 11g USB ADAPTER
After having copied all necessary files in the previous step, we will now connect the Wireless
LAN.
1. Remove the protective covering for the USB connector from your Wireless LAN adapter
2. Insert the USB connector of the adapter in an USB port on your computer or use the
USB cable included in your package, if it is impossible to connect the USB adapter directly on
your computer.