Operation Manual

10
♦ Hexadecimal: 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g. 11AA22BB33)
For 128bit encryption you may choose:
♦ Alphanumeric: 13 characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9” (e.g.
MyKey12345678)
♦ Hexadecimal: 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (e.g.
00112233445566778899AABBCC).
2.2) WPA-PSK / TKIP encryption:
1 - Select authentication mode : WPA-PSK
2 – Select encryption mode : TKIP.
3 – Enter a string from 8 to 63 characters or a
64 hexadecimal characters key in Network key
and Confirm network key
.
4 - Select «OK» to close Privacy
configuration.
5 - select «Apply button» in the Configuration
tab to save the configuration and make setting
take effect
.
The configuration of your Wireless LAN adapter to access to Internet under Windows is finished
II. Configuration to access to Internet under MAC OS X.2 :
For a first installation of your USB adapter you must creates a new network port for it :
♦ Go in the Network tab of the System Preferences menu. A message New port detected
shows up ; if not, go in the Show menu, select Network port Configuration and check, if it is
not, the Ethernet Adaptor port. In all the case click on apply.
♦ If the port is not present or if it appears in grey, restart the computer and resume this operation.
For Windows only