Operation Manual

Throughput : Shows the short term transmit and receive throughput in packets/second, and

is continuously updated.

Segnale: Sulla base della resistenza ricevuta del segnale radiofonico (in %).

Noise: Based on the received radio signal noise (in dBm).

Uninstall the Wireless LAN

1. To remove the Wireless LAN Utility from your computer, go to the Start menu and select

“Uninstall

Sagem WL5021-F Cardbus 802.11g ”.

2. Follow the instructions on the different screens to uninstall the Wireless LAN Utility, then click

on Finish. You should re-boot your computer for uninstall to be effective for all OS.

Troubleshooting

If you experience any difficulty resolving the problem while installing or using the SAGEM Wi-Fi

11g CARDBUS ADAPTER, please contact the supplier for support.

Problem Solution

At SAGEM Wi-Fi 11g CARDBUS

ADAPTER installation, Windows

was unable to locate the driver for

this device.

• Restart your PC and follow the screens showed up.

The Wireless LAN LED does not

come on.

• Check that the Wireless LAN is correctly connected.

• Plug out the Wireless LAN , then plug in it into the same

CARDBUS slot on your computer.

• Under Windows check the Wireless LAN driver is correctly

installed. If this is not the case uninstall then reinstall the

driver.

The Wireless LAN LED flashes

and you cannot access to your

Access Point or to the other client

stations of your network.

• Check that the SSID and the WEP encryption keys are the

same on the computers and the access point which are on

the same network.

• Check that the wireless network is operational.

After a restart of your computer,

the system cannot detected the

Wireless LAN plug into it.

• Plug out the Wireless LAN , then plug in it into the same

CARDBUS slot on your computer.

Ref. 251 891 981